Mike McKinstry
|
 posted on 29/8/02 at 06:37 PM |
|
|
Headlamp brackets??
Hi,anybody seen any nice examples of these I could maybe look at on line before going out to the welder!!Not sure about the box section on
"7Build"-am thinking about semi circular plates but would then have to round edge for sva-Bob /guys what ya doin??Mike.
|
|
|
|
|
bob
|
| posted on 29/8/02 at 06:57 PM |
|
|
Mike
I thought the ones on the 7 build site were OK,if only for simplicity.
Got to admit some of that oval tube merlin and bass are using would be the way to go.
I think bass said he would take some to donington if anybody wanted some.
|
|
|
Jon Ison
|
| posted on 29/8/02 at 07:27 PM |
|
|
made mine outa round tube, big flat disc on top, (middle out of an hole saw) then welded 6 mm Dia pipe all around to give a radius, not sure if you
can see em on pics, take a look, worked 4 me. 
|
|
|
Ian Pearson
|
| posted on 30/8/02 at 07:46 PM |
|
|
I used the mounts off a 2CV. They need some 5.0mm rod welded around the base, but otherwise are an easy solution if you can find an old 2CV.
|
|
|
