Dunc
|
 posted on 2/9/02 at 01:28 PM |
|
|
Daylight, at last!!!
After what I thought would be a 2 week job turned out to be 5 months and 5 50m lengths of sandpaper later and I have emerged from my darkened hole and
just realised I have practically missed summer,D'oh!
I have just completed the buck for my scuttle bonnt nosecone and all that is left is to polish it, fibreglass it and then make the real thing, another
5 months maybe?
To anyone contemplating making their own nosecone I'd say 'don't' unless you are a 16th century italian sculpter. Next time I'd buy one and make
the chassis fit around that! Anyway, I've taken a couple of pics and posted them in my archive bit for anyone interested.
|
|
|
|
|
James
|
| posted on 2/9/02 at 02:43 PM |
|
|
Welcome back to the light Dunc!
Nose cone looks fantastic! after 5 months I hope you think so too!
Cheers,
James
|
|
|
scutter
|
 posted on 2/9/02 at 03:30 PM |
|
|
Don't worry wasn't much of a summer this year anyway.
Outstanding job on the nose cone.
Later Dan. 
|
|
|
Alan B
|
| posted on 2/9/02 at 03:48 PM |
|
|
Top job! Well done, looks great
Now imagine my heartache doing a full body 
I'd definitely agree with the advice, unless you have very good reasons for doing your own moulds DONT. It's very long and hard work, with no or
little incremental reward.
Dunc, would you do it again?
BTW, the mould making and part making is relatively quick by comparison.
|
|
|
Dunc
|
| posted on 2/9/02 at 09:56 PM |
|
|
I would do it again, I learnt a lot of what to do and what not to do. I would probably do similar to you Alan with the hardboard to make most of the
surfaces and I'd cut down on the compound curves.
I did it because I was planning to make a few cars for family and friends to take to track days as well as pleasure driving and wanted to use as many
sierra parts as possible, including the radiator, which is wide and tall and so are the engines, hence the higher curve round about where the cam
covers are. Any power bulges that may be required will only be subtle.
It is quite a bit taller and wider than standard bonnets and nosecones but doesn't really look it and will blend in with the wider track of the
sierra.
|
|
|
