maskell01
|
| posted on 10/5/12 at 12:23 PM |
|
|
Side Panels in FibreGlass
Does anyone know anyone who sells fibreglass side panels for the Ron Champion car?
tried AGM but he only does the haynes roadster!
|
|
|
|
|
Myke 2463
|
| posted on 10/5/12 at 12:35 PM |
|
|
Richd on here or work www.alliedmotorsport.co.uk
Be Lucky Mike.
|
|
|
puma931
|
| posted on 10/5/12 at 12:43 PM |
|
|
Try Low7Man on ebay
http://www.ebay
.co.uk/itm/locost-kit-car-other-7-types-/200753341048?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item2ebdd4e278
I bought narrow front and rear wings, nose, rear panel and scuttle for £200 (collected). He also makes the sides and the quality of the gell coat is
very good.
|
|
|
Simon
|
| posted on 10/5/12 at 01:49 PM |
|
|
I made my own and whilst they were ok, redoing them in ally looked so much nicer.
To make, get a sheet of ally etc, put 90 deg bends at top and bottom edges at right height, and the vertical fold halfwayish along then apply release
agent/wax etc. Apply gelcoat (with or without colour), then lay up resin and matting. Wait a while, demould, tidy edges, paint and fit. It really is
that easy.
ATB
Simon
|
|
|
