joolsmi16
|
| posted on 27/9/06 at 11:20 PM |
|
|
GRP manuf
Hi all, does anyone know of a grp company that will fabricate moulds from drawings and/or finish a once started mould to completion.
My location is west wales but travelling is non relevant as long as the job gets done.
Thanks
|
|
|
|
|
StevieB
|
| posted on 28/9/06 at 08:33 AM |
|
|
If you go to www.totalkitcar.com and find the goods and suppliers lists, you should find a few suitable firms as a starter for 10.
I've never been good enough to design anything worth manufacturing, so can't really help with recomending one over the other.
|
|
|
emsfactory
|
| posted on 28/9/06 at 08:59 AM |
|
|
My uncle is a patern maker and does what you need. In Glasgow though.
Any use?
|
|
|
twybrow
|
| posted on 28/9/06 at 10:23 AM |
|
|
I would suggest a company called Rojac.
http://www.rojac.com/ They are based in the West Midlands, but are one of the ebst in the country. They make a lot of our tooling, but this will not
be cheap. I assume you have a CAD model of the part? Do you have a part to copy or is it still just a drawing? what do you mean you have started the
mould - and need it completing? Tim
|
|
|
DavidM
|
| posted on 28/9/06 at 11:51 AM |
|
|
You could try Triton, who posts on here.
David
Proportion is Everything
|
|
|
joolsmi16
|
| posted on 28/9/06 at 12:13 PM |
|
|
grp
thanks for suggestions bit of a black art and hard to find anyone locally.
The search continues.......
|
|
|
the_fbi
|
| posted on 28/9/06 at 05:36 PM |
|
|
I think Andy Bates is offering this service now. Saw an ad on eBay (with a kart body) saying so.
|
|
|
