axle
|
| posted on 8/3/11 at 02:59 PM |
|
|
MT 75 Gearbox + Vibration damper
Hi all
Can anybody tell me if it is really necessary to have the vibration damper (on the MT 75 box) fitted after shortening the prop, I do not think
Westfields do have it?
Best regards Axle
|
|
|
|
|
Chippy
|
| posted on 8/3/11 at 03:16 PM |
|
|
I assume that your talking about the rubber donut, in which case no you don't need it. I have an MT75 box on my V6 and no donut fitted. HTH Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
|
big_wasa
|
| posted on 8/3/11 at 06:17 PM |
|
|
Depends on prop. If you have a Uj then no but there are some ie westfield that used the donut.
|
|
|
JAMSTER
|
| posted on 8/3/11 at 06:18 PM |
|
|
i have a westfield mt75 and that has one
|
|
|
axle
|
| posted on 9/3/11 at 07:21 AM |
|
|
Hi
I am talking about the wheel in the back of the dount. The rubber dount is part of the assembly and does need to be there! I do not have a UJ
either.
Thanks
|
|
|
big_wasa
|
| posted on 10/3/11 at 09:08 PM |
|
|
No you dont need it.
|
|
|
axle
|
| posted on 11/3/11 at 07:17 AM |
|
|
Thanks mate, it is alway a relief when you get the answer from another enthusiast!
[Edited on 11/3/11 by axle]
[Edited on 11/3/11 by axle]
|
|
|
