pekwah1
|
| posted on 23/1/12 at 07:31 PM |
|
|
Exposed chassis corners
Hi guys,
I'm building a sylva striker.
I was wondering about where the bonnet meets the chassis...
Basically the way the bonnet sits means the front corners of the chassis are exposed.
Is this going to be bad for IVA? As far as i can see it's like this on most strikers...
http://www.autoviva.com/img/large_photos/large_887.jpg
Cheers,
Andy
|
|
|
|
|
loggyboy
|
| posted on 23/1/12 at 07:35 PM |
|
|
As long as its blunted its ok, as i dont think its more than a 5mm projection. And even if it is more than 5mm, a 2.5mm radius is probably achieved
just from the natural shape and powder coating.
[Edited on 23/1/12 by loggyboy]
|
|
|
bi22le
|
| posted on 23/1/12 at 10:55 PM |
|
|
Yep mine is something like that. my nose cone screws in from the sides in to some angle brackets. this may flare the fg nose cone out a little so its
not as bad.
Track days ARE the best thing since sliced bread, until I get a supercharger that is!
Please read my ring story:
http://www.locostbuilders.co.uk/forum/13/viewthread.php?tid=139152&page=1
Me doing a sub 56sec lap around Brands Indy. I need a geo set up! http://www.youtube.com/watch?v=EHksfvIGB3I
|
|
|
