Wells
|
| posted on 2/4/09 at 05:54 PM |
|
|
Weird
I've had the front nose cone painted on my MNR about 2 weeks ago and everything was perfect up until tonight! For some reason 2 dents have
arrived on the top of the nose cone! It looks like it has started to flex or melt but there in no heat soarce or impact. I gave it a dust off last
night and they wearnt there. Any ideas why this would happen? Could it be a paint reaction with the fibre glass and if so why has it taken 2 weeks to
happen?
|
|
|
|
|
Paul (Notts)
|
| posted on 2/4/09 at 05:56 PM |
|
|
was the cloth clean? any chemicals used?
[Edited on 2/4/09 by Paul (Notts)]
|
|
|
marc n
|
| posted on 2/4/09 at 06:05 PM |
|
|
sounds like a reaction as the paint has dried, or if its been filled the filler has sunk / bloomed 
im no expert so dont take it a gospel we did have a paintshop in house at one time but my only involvement was moving the cars in and out 
hope it nots too bad, if so what about a full racing stripe
cheers
marc
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Wells
|
| posted on 2/4/09 at 06:08 PM |
|
|
the cleanest cloth you will come across! I hve a hair dryer on them just now and iam using the back of a screw driver to push them out which is
working a treat. It still weird how they have apeared though!
|
|
|
iain b
|
| posted on 2/4/09 at 09:44 PM |
|
|
had my cobra painted and they used a sealer before the primer as he said u get small air bubbles in gel coat which get trapped under the paint.i have
had no problems.
|
|
|
