Richard Quinn
|
| posted on 4/5/09 at 07:44 PM |
|
|
Stone guards - STM/Aries
I am after some stone guards for my Locoblade but having had a frantic couple of weeks leading up to SVA I want something that will just go straight
on with minimal fettling. The rear arches are quite narrow at the bottom of the front (~20cm) and most of the ones available off-the-shelf are about
24cm. I have trial fitted some carbon-look abs ones and they looked crap and carbon-look vinyl didn't look right either. The bottom outside
corner has a bit of a compound curve to it which makes it a little awkward to get either abs or vinyl to sit right.
Anyone got any other suggestions please?
|
|
|
|
|
slimtater
|
| posted on 4/5/09 at 07:54 PM |
|
|
See my post from Saturday and photo archive - fitted some pukka self adhesive carbon fibre today. Two 50x25cm sheets for £35 and dead simple to trim
and shape.
http://www.picturetrail.com/sfx/album/view/19919222
|
|
|
Bladerunner
|
| posted on 4/5/09 at 07:56 PM |
|
|
Stoneguards
I have a S.T.M Locblade and I bought from the Robin Hood Company a set of there aluminium guards. Being alloy they bend to the shape of the rear
arches and I pop riveted them in place. I don't know if they are still available as they have changed hands but give them a ring, they were only
£10 for the pair.
Adventure before Dementia
|
|
|
slimtater
|
| posted on 4/5/09 at 08:02 PM |
|
|
^^^^^^^^^^^
And see my other post about the quality of these! 
http://www.picturetrail.com/sfx/album/view/19919222
|
|
|
Richard Quinn
|
| posted on 4/5/09 at 08:23 PM |
|
|
quote:
Originally posted by slimtater
See my post from Saturday and photo archive - fitted some pukka self adhesive carbon fibre today. Two 50x25cm sheets for £35 and dead simple to trim
and shape.
Where from please?
|
|
|
slimtater
|
| posted on 5/5/09 at 06:41 AM |
|
|
Hamilton Classic (www.hamiltonclassic.co.uk). I got two sheets of adhesive (3M) 50cmx25cmx1mm for £35. Rally Design also do it - don't think it
is listed on their web site but it is number CE124 - £14.80 + VAT.
http://www.picturetrail.com/sfx/album/view/19919222
|
|
|
Vindi_andy
|
| posted on 6/5/09 at 08:49 AM |
|
|
Can you use the clear stonegaurd film from CBS
Self adhesive and can be cut with scissors and because it clear isnt noticeable
|
|
|
