kylerichmond
|
posted on 24/1/11 at 05:26 PM |
|
|
Which Polo Radiator
I currently have a polo radiator fitted to my robin hood however due to cooling issues im wondering what everyone else is using?
Mine is 430x322x20 core size
Please can everyone list there own sizes and if it cools ok?
also any recommendations on were i can get a cheap one
|
|
|
BenB
|
posted on 24/1/11 at 05:41 PM |
|
|
It might just need some baffles to force air through the rad- the nosecone on sevens gives plenty of space round the edge of the rad for the air to
spill round rather than going through the rad.
|
|
Strontium Dog
|
posted on 24/1/11 at 05:51 PM |
|
|
quote: Originally posted by BenB
It might just need some baffles to force air through the rad- the nosecone on sevens gives plenty of space round the edge of the rad for the air to
spill round rather than going through the rad.
Spot on and also the air needs to escape from the engine bay too. It is easy to end up with positive air pressure in the bay and that inhibits air
flowing in through the rad!
|
|
snapper
|
posted on 24/1/11 at 06:38 PM |
|
|
Definatelly baffle the nose to force all the air through the rad.
As a short term fix try propping the rear of the bonnet up 10mm, worked for me.
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|