peteday_uk@btinternet.com
|
posted on 11/4/11 at 09:59 PM |
|
|
Prop angle
Hi.....I need help
What is the minimum angle needed to allow the prop joint/uj to have load on them for a bike engine car. At the moment the reverse box centre sits
about 5mm above the diff centre, is this enough to put load on the UJ's?
All the best
Pete
|
|
|
Bluemoon
|
posted on 12/4/11 at 08:02 AM |
|
|
Take a look at:
http://www.locostbuilders.co.uk/viewthread.php?tid=145955
Remember the angle is not just in one plane (up and down) but also sideways as well if you see what I mean.. Can't comment on 5mm the angle
depends on prop length as well as the 5mm you mention..
Dan
|
|