rich201283
|
posted on 9/7/12 at 05:44 PM |
|
|
What are the cylinder head torques on a Ford Zetec se 1.6?
What are the cylinder head torques on a Ford Zetec se 1.6 2002 plate?
|
|
|
johnH20
|
posted on 12/7/12 at 08:36 PM |
|
|
According to my Haynes manual refitting the cylinder head is a 3 stage process. 1) torque to 15Nm ( in the right sequence of course ) 2) torque to
30Nm 3) angle tighten through 90 deg. You will need new bolts.
|
|
beaver34
|
posted on 12/7/12 at 09:11 PM |
|
|
quote: Originally posted by johnH20
According to my Haynes manual refitting the cylinder head is a 3 stage process. 1) torque to 15Nm ( in the right sequence of course ) 2) torque to
30Nm 3) angle tighten through 90 deg. You will need new bolts.
Not 100% true,
Bolts can be used twice then you new ones, the question is have they been out before
|
|