alan87
|
posted on 23/7/12 at 12:26 PM |
|
|
AO48's loads of tread!
I have a set of Ao48's i have used for a short period of time on my fury.
2 in 185/60/r13 (fronts)
2 in 205/60/r13 (rears)
They are on 13" 4 spoke RS wheels in black et19. The wheels are not perfect and have some flaking etc. The tyres have loads of tread left!
Selling due to starting a rebuild and they wont be used for the foreseeable future.
Based near Southampton, Hampshire.
Looking for £300ono
Pictures to follow.
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
Fizzer
|
posted on 23/7/12 at 06:10 PM |
|
|
I'm v interested. How many miles have they done? any track days? Can you measure the tread?
Thnx
Andy
|
|
alan87
|
posted on 23/7/12 at 07:07 PM |
|
|
I've done about 200miles max on them. I bought them from a guy on another forum who had done a couple of sprints, then was rebuilding his car so
sold them on!
I'll get out to the garage in a bit and try and measure the tread depth.
|
|
alan87
|
posted on 23/7/12 at 07:27 PM |
|
|
Tread is between 3-4mm
|
|
Furyous
|
posted on 24/7/12 at 06:14 AM |
|
|
Don't they start with only about 4.5mm from new? Barely worn.
I'd be tempted to get them as some track spares but I can't right now.
[Edited on 24/7/12 by Furyous]
|
|
alan87
|
posted on 26/7/12 at 08:27 PM |
|
|
Bttt....open to reasonable offers.
Would like to buy a klde!
|
|
fullpint
|
posted on 27/7/12 at 12:33 PM |
|
|
Are they 13 x 7"? Need to check they will suit a Mk Indy.. How far away are you from SN13 0LF
Cheers; Steve
I've over 28 years in dealing with magnesium wheels. Refurbishment and can powder coat most metal parts. Visit my web site if you wish..
www.tpcs-magnesium-refurbs.co.uk
|
|
skippad
|
posted on 27/7/12 at 02:02 PM |
|
|
I'd have them for me indy, but the offsets all wrong, they'd be sticking out of the arches another 20mm!
|
|
alan87
|
posted on 27/7/12 at 05:32 PM |
|
|
Hi,
They are 6" wheels.
Fullpint I'm about an hour 45mins according to google maps!
|
|
fullpint
|
posted on 28/7/12 at 06:20 AM |
|
|
quote: Originally posted by skippad
I'd have them for me indy, but the offsets all wrong, they'd be sticking out of the arches another 20mm!
Bummer, I will try to have a measure up and do a little drawing just to see where the flanges would sit in my arches.. Gutted if they wont fit..
I've over 28 years in dealing with magnesium wheels. Refurbishment and can powder coat most metal parts. Visit my web site if you wish..
www.tpcs-magnesium-refurbs.co.uk
|
|