Crazy Jay
|
| posted on 22/10/04 at 03:23 PM |
|
|
Nose cone fitment?
Does any2 hav any pics of their nosecone being fitted? Cause mine looks almost too wide for the chassis, does it actually sit on the bars where the
light bar goes?
|
|
|
|
|
subk2002
|
| posted on 22/10/04 at 03:30 PM |
|
|
I might have some pic's in my archive jay.
Cheers Drew
|
|
|
Guinness
|
| posted on 22/10/04 at 07:19 PM |
|
|
I'm at the stage of trial fitting the nose, and it looks too wide at the front, but i think thats deliberate to cover the inboard suspension
mounts for SVA.
Once u cut a notch out for the headlamp bar it fits ok at the bottom and back (at the join with the bonnet). I'll post a pic to the archive
later.
|
|
|
bob
|
| posted on 22/10/04 at 08:03 PM |
|
|
mines an old version nose cone but there are some pics in the archive that might help.
|
|
|
derf
|
| posted on 22/10/04 at 08:06 PM |
|
|
I'm guessing your looking for one for an indy, but...
 
trial fit of fiberglass with aluminum
 
Overview
 
1/4 view with front suspension, nose and radiator.
|
|
|
Crazy Jay
|
| posted on 23/10/04 at 01:31 PM |
|
|
Thanks every1  will fit it tomoro, well try anyway
|
|
|
wheelsinsteadofhooves
|
| posted on 26/10/04 at 12:06 PM |
|
|
hi,
tried fitting my nosecone on the weekend, but doesnt reach bottom chassis rail. think it may be race version (as bought with race chassis), but going
to be road car. cone seems ok made, with moulded cut-outs for headlamps etc, so would like to use. is this cool with respect to sva, and how to make
it look nice? any alternative nosecones out-there that fit and look good?
|
|
|
