Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: CBR1000 After Market ECU
DANMAN

posted on 23/9/20 at 11:55 AM Reply With Quote
CBR1000 After Market ECU

Hoping someone may be able to help here. I have had an absolute turd of a time trying to get my 2005 CBR1000 engine to run properly and be able to fit under the bonnet which meant having to make a new curved intake and trumpets and side mount the secondary injectors.

After three different intake runner setups I can't get it to run right as it leans out big time after about 7k so basically I am at a point where I'm thinking of ditching the whole secondary setup and just running bigger primary injectors with a standalone ECU.

Has anyone else been down this path before and if so what ECU did you use?











View User's Profile View All Posts By User U2U Member
OliverJamesThomas

posted on 25/9/20 at 04:33 PM Reply With Quote
I’m currently going through all this at present, with a Fireblade engined Phoenix. It is a race only car, so I am looking to build a new stand alone engine loom that will allow for HISS, etc, to be binned. I have a similar plan of rotating the air box to get rid of the current bonnet bulge that is difficult to see past.

There are a few ECU options available from the likes of Syvecs and Link that will run the primary and secondary injectors, but the one bit of information I haven’t yet found is the crank trigger pattern. Knowing that would possibly allow other models of ECU to be considered, but the information doesn’t seem to be available anywhere. I think I’m going to have to resort to a physical inspection when I return from working away.

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.