Michael
|
| posted on 10/6/06 at 06:47 PM |
|
|
Bright 6 Module Warning Lamps
Im interested in fitting a Bright 6 Module.
As im restricted for room above the steering column i got in touch with the company who make them who gladly gave me the information about the size
including the PCB at the rear of the unit, but just wonder if any one has a photo of theres fitted in the dash as even though they are birght they
arent that bright.
Thanks
|
|
|
|
|
piddy
|
| posted on 10/6/06 at 07:01 PM |
|
|
They are very low indead probaly about 15MM high.
|
|
|
James
|
| posted on 10/6/06 at 07:22 PM |
|
|
quote:
Originally posted by Michael
Im interested in fitting a Bright 6 Module.
As im restricted for room above the steering column i got in touch with the company who make them who gladly gave me the information about the size
including the PCB at the rear of the unit, but just wonder if any one has a photo of theres fitted in the dash as even though they are birght they
arent that bright.
Thanks
To be honest there was a discussion on here about how they were too bright.
People were looking at fitting resistors and the like to turn down the brightness.
So I don't think you need to worry about it too much! 
HTH,
James
------------------------------------------------------------------------------------------------------------
"The fight is won or lost far away from witnesses, behind the lines, in the gym and out there on the road, long before I dance under those lights."
- Muhammad Ali
|
|
|
David Jenkins
|
| posted on 10/6/06 at 08:45 PM |
|
|
As said - they are very bright - I went out this afternoon in full sunshine, and could very clearly see the symbols. I fitted a resistor in circuit
so that I could see the road at night when the full beam warning was lit!
David
|
|
|
bigrich
|
| posted on 10/6/06 at 10:27 PM |
|
|
i have never found the brightness a problem on my bright 6 and has been 100% reliable
 
Rescued attachment bright6.jpg
|
|
|
esn163
|
| posted on 11/6/06 at 07:54 AM |
|
|
Hi,
We had no problems with fitting ours, to give the wires more clearence on the scuttle, we just dremeled out a U shape above where the PCB fits. Also
no problems with brightnes.
HTH
Ed
Indy Build Photos
** Build pages **
Photo Bucket Pics
|
|
|
Michael
|
| posted on 11/6/06 at 08:07 PM |
|
|
They do look good.
I made up a mock of the module today, out of wood and hardboard. It fits quite well too behind the dash. Even made up a template of Fashia Panel to
stick to dash.
Spent rest of the day making bracket to support lower steering cowling.
|
|
|
