Dick Axtell
|
 posted on 31/5/02 at 07:08 PM |
|
|
Blind Rivets
Hi all you Experts -
Apologies for duplication (posted this on TOL).
Who supplies blind rivets (those without the shear-off head)? These were recommended by another special builder, because they don't leave loose rivet
heads rattling around thwe chassis tubes.
Dick Axtell
|
|
|
|
|
paulf
|
| posted on 31/5/02 at 10:47 PM |
|
|
quote:
Hi all you Experts -
Apologies for duplication (posted this on TOL).
Who supplies blind rivets (those without the shear-off head)? These were recommended by another special builder, because they don't leave loose rivet
heads rattling around thwe chassis tubes.
Dick Axtell
|
|
|
paulf
|
| posted on 31/5/02 at 10:51 PM |
|
|
I got mine from Eastmidland fastners in wellingboro northants, i bought 300 for about £7.00 inc vat.They also ensure the chassis remains
watertight.
Paul.
-
Apologies for duplication (posted this on TOL).
Who supplies blind rivets (those without the shear-off head)? These were recommended by another special builder, because they don't leave loose rivet
heads rattling around thwe chassis tubes.
Dick Axtell
|
|
|
stephen_gusterson
|
| posted on 1/6/02 at 12:21 AM |
|
|
I buy all mine from there too Paul. They will sell a single nut if you want subject to about 4 quid min charge. dont imagine they post stuff
thou.....?
atb
steve
|
|
|
Dick Axtell
|
 posted on 4/6/02 at 04:34 PM |
|
|
Thanks for your input, guys. Have since found a couple of possible sources here in Brum. Will check them out later this week.
Dick
|
|
|
.jpg)
