ChrisS
|
| posted on 3/7/07 at 08:22 AM |
|
|
Bonnet Buldge
Hi
I wondered if anyone has an idea where i can get a nice looking bonnet buldge like on the Dax Rush and MK Indy. Im making an ali bonnet otherwise id
buy a bonnet with it included.
I want to just graft the fibreglass buldge onto my ali bonnet.
Cheers
ChrisS
|
|
|
|
|
ReMan
|
| posted on 3/7/07 at 08:25 AM |
|
|
Fairly sure MK sell the bulge on it's own
|
|
|
Agriv8
|
| posted on 3/7/07 at 10:02 AM |
|
|
Could try MNR .
looking at their website they sell em seperatly.
PS thats what I have fitted
<------------
PPS Marc on his honeymoon So Chris is providing a skelaton service on the workshop e-mail.
regards
Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
Hellfire
|
| posted on 3/7/07 at 12:02 PM |
|
|
quote:
Originally posted by CaLviNx
quote:
Originally posted by ReMan
Fairly sure MK sell the bulge on it's own
I got a friend to phone to ask them if they would sell a bulge on it own the answer was no............. they would only sell a bonnet &
bulge as a pair. 
You need a pair of what you're offering in your avatar, cos quite clearly you aint got any of your own ...... 
Phil
|
|
|
John Bonnett
|
| posted on 3/7/07 at 05:28 PM |
|
|
Chris, why not make your own bonnet bulge. It's quite easy using aluminium and if you have a look at my website there is a step by step guide
covering the one I did for my Phoenix. The finished bulge can be bonded and blended in without too much trouble.
atb
John
|
|
|
