scutter
|
 posted on 11/6/02 at 05:47 PM |
|
|
scuttle plans
Does anyone out there have a set of plans for the front and rear of the scuttle, have made one but doesn't fit Lolocost screen I have already bought.
Would be nice to follow the line's from the nose cone. Cheers Gents.
|
|
|
|
|
philgregson
|
| posted on 6/8/02 at 10:23 AM |
|
|
Interesting this scuttle thing - I don't know if I'm missing something obvious but It doesn't seem that straight forward to me.
I intend to buy a Lolocost windscreen and they provide a profile for the bottom of this but it is obviously not the full width of the scuttle and I do
not know which point along the scuttle this fits.
It is al right the book saying cut a piece of X times X and round the corners but it is not as simple as that is it.
Also having made the front panel in what way does this translate to the sloping profile at the rear.
I keep thinking it ought to be more straight forward than it seems beacuse every one else has done it with no problems at all.
If it is me being stupid then let me know beacuse I could do with bloody well getting on with it.
|
|
|
scutter
|
 posted on 6/8/02 at 10:56 AM |
|
|
Phil, tis week I'm going to take a look atmy mates Tiger cat, if he'll allow it I'll copy the profile of that and post it up. Scutter. 
|
|
|
philgregson
|
| posted on 6/8/02 at 07:11 PM |
|
|
That would be good.
|
|
|
scutter
|
 posted on 11/8/02 at 05:33 PM |
|
|
tiger scuttle has vertical ends, no good sorry. Ended up playing about for a day to get the rough shape, had to do some research at snetterton with
the locost racers. Good day out. 
|
|
|
