Westfield (BEC) Parts
Tonto1 - 21/1/10 at 07:01 PM
All taken from a 55-plate factory built, low mileage car.
Full set of standard track front wish bones. Good condition, includes bushed and upper ball joints.
Westfield reverse box and props all in good condition, taken off car nearly two years ago and so have done very little mileage.
Westfield Dry sump tank, modified to 12AN fittings. Good condition, fits onto WF chassis perfectly, aprox' volume 7L.
Diameter: 6"
Height: 15"
[img]
Need space in garage, first sensible offer on anything secures.
[Edited on 21/1/10 by Tonto1]
[Edited on 22/1/10 by Tonto1]
Steve Hignett - 21/1/10 at 08:07 PM
What dimensions are the Props please?
Tonto1 - 22/1/10 at 11:31 PM
Props as follows from fully closed to fully open (both have extendable sections) flange face to flange face:
Front - 39.5-41.5cm
Rear - 84-87cm
Rear pro also has TRT section.
smithwrecker - 23/1/10 at 02:34 PM
U2U sent, ref' wishbones
zilspeed - 23/1/10 at 03:17 PM
Tonto
Would this be you here ?
JF - AKA the Marshall at the top corner at Forrestburn (usually) 
moochofun - 23/1/10 at 06:46 PM
Yep, that be him...
zilspeed - 23/1/10 at 07:34 PM
Oh FFS, it's like being on Flatchat in here all of a sudden.
All we need now is Ninjabogey and Mr Minitici aka Westgarage and we'll have the full set.
Tonto1 - 24/1/10 at 09:36 AM
quote:
Originally posted by zilspeed
Tonto
Would this be you here ?
Guilty- And may I complement you on your forum detective (and marshalling) skills!!!
[Edited on 24/1/10 by Tonto1]
FFTS - 24/1/10 at 07:44 PM
U2U sent
Tonto1 - 29/1/10 at 03:54 PM
quote:
Originally posted by FFTS
U2U sent
And replied to!
Thanks