My Kitcar is now on the road and I am looking to fund some upgrades. I have the following items that I no longer require. Guide Prices included, but
open to offers. I would prefer collection from Peterborough, but could post some of the items at costPlease U2U me if interested. I might not reply
immediately, but I promise I will reply.
Shortened Drive Shafts and hubs to Suit Locost with IRS and discs - Have been fitted to a Luego Locost previously. Been sitting in garage for some
time but bearings were new and have barely been used, £50ono:
Driveshafts
Windscreen. I am not sure what it was originally off of but in the picture you can just about make out the outline of a Westfield screen and a Luego
screen. It is slightly narrower. Dimensions can be supplied on request £50ono:
GSXR 600 K2 Throttle Bodies (38mm Internal Diameter at Butterfly) and Injectors. The injectors are the same as the 750 and 1000. I bought these and
then managed to get a set of 750's so I have not used them. They can be respaced, £60 ono:
Naca Duct. No longer required. Can make measurements if required, £10:
NACA Duct Combined
Camber Adjusters unused, £10ono:
Camber Adjusters
Unfortunately I am not planning to go to Stoneleigh.
[Edited on 28/4/10 by mccsp]
u2u
Can i have the duct please
Camber adjusters provisionally sold (boggle) - U2U sent
Duct provisionally sold (madrallysport) - U2U on the way
u2u sent re windscreen
Hi,
Just measured and I can confirm the TB's are 38mm ID at Butterfly.
Measurements for the screen are now on the picture above.
Second dibs on the duct please
Camber Adjusters sold (payment recieved)
Duct sold (payment recieved)
TB's sold (payment recieved)
Are the drive shafts from a push in diff converted to disks or are they from a bolt in diff?
(i'm looking for push in originally)
Has the screen gone?
Windscreen provisionally sold to Lars with collection on Sunday
could i have the shafts? Away for the w/e so will be few days before i can pay and collect
Driveshafts provisionally sold to MikeR