Board logo

Pinto bits wanted
55ant - 5/10/09 at 01:43 PM

Hi all, im after the following

- Pinto sump
- Pinto oil sandwich plate
- type 9 gear stick relocator jobby
- MK Indy rear shelf-tray
- Matching pair of rev+speedo or digi dash to suit cec

cash waiting (all be it a very stingy locost amount! only joking......)


andrewcutchey - 5/10/09 at 01:53 PM

Hi Ant,
I hope that the carbs are OK.
Shameless plug ETDWM
http://shop.ebay.co.uk/peppapig09/m.html?_nkw=&_armrs=1&_from=&_ipg=


richwill - 5/10/09 at 02:59 PM

you have u2u


bigpig - 5/10/09 at 05:16 PM

I've got one of those type 9 gear stick relocators. Near brand new (from rally design).

Put it in once, found it was a bit close to the tunnel on my setup and preferred the slight steach of the normal setup anyway.

Cost me about £65 including vat and postage

I've also got a spare 1.8 pinto engine if you want it for the sump (say £20) without the rocker box cover (I'm gonna keep the rocker box for practicing coverting the filler hole).


goaty - 5/10/09 at 07:12 PM

i have a sandwhich plate spare