Board logo

mnr seat fittting and exhaust
jambo - 8/11/08 at 01:02 PM

any mnr guyes got pictures on how they secured there seats,i have the plastic ones and i intend using the sliders aswell.
(diagonal rail in the way)
also any ideas what i can do for a small cat for sva and mot testing.
i have the 4 2 1 exhaust.
cheers jamie.


GeorgeM - 8/11/08 at 03:40 PM

Hi,

speak to chris & marc about both.

They supply a loan cat for sva.

Seat runners are mounted on spacers with
large washers to spread the load on the
floor- again mnr supply

GeorgeM


coozer - 8/11/08 at 06:24 PM

My fibreglass seats sit on Citroen runners that are attached to floor with 3 1" ali spacers and the other, (outside rear both sides) bolt through the diagonal chassis rail.

Big M8 penny washer either side of the ali and they passed SVA OK.

Just took this picture of the front inside passenger side (complete with umbrella!)



Steve

[Edited on 8/11/08 by coozer]


TimC - 8/11/08 at 09:21 PM

Yes - spacers required; had mine turned in the end after I decided I wasn't happy with the straight ones: