Board logo

Steering Rack
spdpug98 - 27/2/09 at 05:04 PM

Can anyone help I have fitted the steering rack this afternoon and there is a problem.

If I have one of the wheels pointing dead a head the other is 'toeing out' a good few degrees, there is no adjustment on the rack or ends and it has me baffled (not difficult!!)

I have attached a couple of pictures - have I done something wrong




GeorgeM - 27/2/09 at 05:15 PM

if there is no adjustment left on the alloy extensions,
contact MNR. There were 2 different lengths

GeorgeM


bassett - 27/2/09 at 05:27 PM

at dead central mine were both too long giving high toe out so i chopped a few mm off the end of the ally arm extension

[Edited on 27/2/09 by bassett]


spdpug98 - 27/2/09 at 05:28 PM

George

Thanks for the reply, just spoken with Chris and looks like I may have the wrong extensions


Pdlewis - 27/2/09 at 05:45 PM

I had the same so cut some off the extensions


Johneturbo - 2/3/09 at 03:03 PM

quote:
Originally posted by Pdlewis
I had the same so cut some off the extensions


i tried that but it only screws so far on, then runs out of thread in the extension.
did you tap out the extension