Board logo

Not looking good....
coozer - 26/4/11 at 12:14 PM

Been out over the weekend hooning about.. popped out yesterday to visit a couple of fellow builders and noticed my silencer is cracked round the pipe entering the box... so that's off now and down at the local machine shop. Problem is the guys a proper pertol nuthead and is off to Cadwell this afternoon in his crazy Scooby.. come back Thursday he said but not too early

Striving to get the cage on for Stoneleigh - fabbed all the bits and bobs, marked it all up for welding, tapping the inserts and BANG, the bloody tap wrench flew to bits!!! AAARRRRGGGGHHHHHHHH!!!!

Fingers crossed I get the silencer back as the 4 into 1 manifold is a tad on the loud offensive side

Steve

[Edited on 26/4/11 by coozer]


Guinness - 26/4/11 at 12:54 PM

Steve

If you get stuck, my exhaust can is just sitting here doing nowt. You are welcome to borrow it if it'll get you moving.

Mike


r1_pete - 26/4/11 at 02:19 PM

I'll post a pic of a home made tap wrench when I get home, you could knock one up in half an hour.


RickRick - 2/5/11 at 03:49 PM

My mnr can has gone the same way after a 140 miler on saturday


cerbera - 2/5/11 at 04:20 PM

Hmmm...So has mine