Board logo

Mnr. Help with a measurement
daniel mason - 10/2/12 at 08:25 PM

Could Someone please measure the distance between the 2x rear cage/ roll bar stays please.
From centre to centre at the top (roll bar) end. Cheers. My car is at Mnr at moment so I can't measure. Cheers


TimC - 10/2/12 at 09:30 PM

I'd be inclined to want the exact measurement from the car in question. I can't imagine these are jigged.


daniel mason - 10/2/12 at 10:29 PM

cheers tim. i just thought all rear stays were welded to cage at same point