Hi All

Just wanted to introduce myself to the forum.

I ordered a Vortx RT Inboard at Newark and after having issues with my garage lease, will be taking delivery around the end of September.

Managed to find a Sierra 2.3D and have almost finished stripping it down.

I dont have any real experience of doing this kind of thing before so look forward to some pretty stupid questions!

Thanks

Parvez

Welcome to the forum. I'm pretty new also but there is a good wealth of knowledge and i dont think there will be a question that can't be answered by this lot!

Welcome and good choice of car. You'll find we're a generally helpful bunch here and most of us have been through the pain that awaits you. Actually, the VortX is a straightforward build so have fun.

What engine are you going to fit BTW?

2.3 sierra. . . .good find.

hello and welcome.

will you be joining the BEC owners club ?

[Edited on 21/8/07 by graememk]

Regards Engine choice, was going to be ZX9 but lost out due to problems with securing the garage lease, now looking at an R1 thats come up from a friends bike.

Will join the BEC owners club once I'm a little further into the build.

Welcome, I'm sure you've made the right choices. Does the donor have the elusive 3.08 ratio diff in it? If so well done indeed.

Just ask even if you think the question is really dumb, you will get a nice responce

Regards,
Steve

Congratulations on the choice, you picked right.

Your not to far from me so if you get into difficulties let me know.

Steve

quote:

---

Originally posted by coozer
Welcome, I'm sure you've made the right choices. Does the donor have the elusive 3.08 ratio diff in it? If so well done indeed.

Just ask even if you think the question is really dumb, you will get a nice responce

Regards,
Steve

---

Its got the 3.38, one of the main reasons for getting it.

amalyos - thanks for the offer, gone for a pretty similar colour scheme to yours.

good luck with the build mate

ta chris

Sorry, typo error we all know it was 3.38.....

(Hiding)

Welcome aboard.
I was in the same position as yours, but with the MNR and the BEC forum you'll be always fine...

Cheers,
Joao