Hi, with the RT inboard are the front springs and dampers (12inch) the fronts and the longer at the rear?
Cheers
Adam

Yes

Thanks again Stuart. Also a query with the pivoting arms, if your looking at one side only is it cylindrical radial bearing then radial thrust bearing then thrust washer then another radial thrust bearing as i havent got the manual?
Cheers
Adam

Yes it is according to the manual although I can't remember fitting that many bearings or even having that many bearings in the kit

I'm off to check now..........

Mine are as below...phew.

[Edited on 19/3/08 by stuart_g]

I remember the manual's slightly wrong, this is what I had from Marc when I fitted mine:

instructions are wrong you have the correct amount, should be fitted washer , roller bearing, washer

HTH


Vince

as above, washer, bearing, washer. Manual
has them other way round.

ssh, MNR got something wrong

Cheers guys that does sound more logical and just aswell i didnt get time for that job tonight or i could easily have spent a few hours looking through the rest of the unopened boxes for the extra washers.
Adam