Board logo

954 Fireblade Clutch Options
shane159 - 21/8/15 at 05:12 AM

Just wondering if there's anything that can be done to the clutch system to make it easier to set off from junctions etc, no matter how smooth I try to set off 2 in 10 times I stall it lol. Once I'm going it's fine as it has a quickshifter for up & down shifts.

I've tried adjusting the cable but doesn't make a difference.

Any help would be great.

mark chandler - 21/8/15 at 07:11 AM

You need to alter your pedal ratio, move the pivot closer to the cable on the pedal

shane159 - 21/8/15 at 07:26 AM

quote:
Originally posted by mark chandler
You need to alter your pedal ratio, move the pivot closer to the cable on the pedal


Thank you for the advice, I've give that a try this weekend.

shane159 - 1/9/15 at 02:28 PM

I'm still struggling with setting off in the MK, how much of a job is it to change to fully hydraulic set up and will this help me?

It seems to be hard to find that correct balance of throttle & clutch, I don't think any of them have a problem but I just can't get to grips with it.