bassett
|
| posted on 9/11/08 at 10:12 PM |
|
|
another tub fitting q
Hi, just wondering if its recommended to take the body off once the rear driveshaft cut outs have been made as id like to get it done but there are
some other bits i imagine i will need to take the tub off again for. So just wanted to make sure if i do it it wont crack from being weaker.
Cheers
Adam
My MNR Blog Updated Jan 2010 - Track Day Prep Begins!
|
|
|
|
|
Pdlewis
|
| posted on 9/11/08 at 10:15 PM |
|
|
I found once the cuts were made it was very weak when taking it off. to get arround this I cut wood the width od the bottom of the cut out and screwed
it on and the streangth was back
Build Photo Album
Updated 05/02/2009
|
|
|
bassett
|
| posted on 10/11/08 at 12:54 PM |
|
|
cheers i was thinking it might become a bit fragile so i might leave it till we really need to do it just leaves us with the boring jobs till then
though
My MNR Blog Updated Jan 2010 - Track Day Prep Begins!
|
|
|
