Triggerhappy
|
| posted on 8/5/09 at 09:27 AM |
|
|
Wheelnuts
What thread is it on wheel studs?
Vortx Super (raceleda style) front and ford rear (push in shafts if it make any difference)....
Stupid question but answers needed.
My humble thanks in advance.
|
|
|
|
|
sucksqueezebangblow
|
| posted on 8/5/09 at 11:41 AM |
|
|
I'm pretty sure they are Ford Sierra wheel nuts all round. That is what I've bought. Not sure I've tried them on the front yet but
would be very surprised if they are not the same all round.
Better to Burnout than to Fade Away JET METAL ~ AndySparrow © 
|
|
|
spdpug98
|
| posted on 8/5/09 at 11:43 AM |
|
|
As far as I know they are Ford Sierra, they are all the same as my nuts came with my wheels
My Blog: http://spdpug98.wordpress.com/
|
|
|
Howlor
|
| posted on 8/5/09 at 12:12 PM |
|
|
M12x1.5mm if I recall correctly.
Steve
|
|
|
Triggerhappy
|
| posted on 8/5/09 at 01:10 PM |
|
|
quote:
Originally posted by Howlor
M12x1.5mm if I recall correctly.
Steve
Exactly...is it 1,5 or 1,25 ??
Want to buy alloy nut´s....but need to be shure about the thread.
|
|
|
stuart_g
|
| posted on 8/5/09 at 02:58 PM |
|
|
I'm sure they are M12x1.5 aswell.
|
|
|
Krismc
|
| posted on 8/5/09 at 04:05 PM |
|
|
agreed, ive just bought some and they fit.
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
Triggerhappy
|
| posted on 8/5/09 at 09:28 PM |
|
|
Then im greatful for your answers gentlemen *thumbs up* 
|
|
|
