Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: MNR bonnet scoop how do you fit yours?
Pdlewis

posted on 26/12/09 at 02:44 PM Reply With Quote
MNR bonnet scoop how do you fit yours?

Afternoon, happy xmas and all that

I have just come to fit the bonnet scoop to my MNr that I got off MNR a few months ago and Im a bit puzzled as to how to do it. My first though was glueing front and back would hold it but on closer inspection when i put the scoop on the bonnet only the 4 corners touch the actual bonnet due to the curve of the bonnet and the scoop.

An suggestions/methods you have used for fitting yours?

Cheers

Paul








Build Photo Album

Updated 05/02/2009

View User's Profile View All Posts By User U2U Member
prawnabie

posted on 26/12/09 at 03:17 PM Reply With Quote
If it is anything like the carbon mods one, I sanded the corners so it was flush with the bonnet and sikaflexed 4 "L" shape brackets on and bolted it to the bonnet through these.

You could always used "U" trim where it meets the bonnet if you don't want to sand, or use even more sikiflex instead of bolting it on.

HTH

SHaun

View User's Profile View All Posts By User U2U Member
daniel mason

posted on 26/12/09 at 10:28 PM Reply With Quote
am sure the mnr guys use sikaflex.it really does get a good hold.
View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.