The Venom Project
|
| posted on 16/2/10 at 02:21 PM |
|
|
Gipro + TRE
Initial thought when looking through the instructions was worrying. Thinking of taking apart original Kawasaki connections to remove wires to fit
into the supplied connections on the Gipro was quite scary, but once I had found the connection I just cracked on and did it. It only took about 20
mins to fit and looks good too. Its much bigger than its inferior Acumen DG8, very clear display. I hope this with a power commander will make my
car run a dream once its been to Daytuner. However I didn't try to start it lastnight, so hopefully tonight it will still start.
|
|
|
|
|
bob tatt
|
| posted on 16/2/10 at 03:25 PM |
|
|
i fitted one last week and it was a doddle just connected it into the loom and put an live to it all running with ne probs well inpressed and very
bright display. not the cheapest but they work after having acumen too small and dim in my vue, bike tronics never worked right despite trying to
program it many times ended up in the bin gi pro is the way forward, damiens a top lad and will have your engine spot on by the time you leave.
rob
|
|
|
