The Venom Project
|
| posted on 16/2/10 at 03:13 PM |
|
|
Tonneau Cover?
Has anyone had one of these made for there MNR? The reason I need one is to cover up the boot area, I do not intend to fit the boot box, and the boot
plastic cover panel is not a nice enough look for me. Any ideas on the boot area would be great, any pics would also be most useful
Cheers
|
|
|
|
|
eznfrank
|
| posted on 16/2/10 at 03:35 PM |
|
|
Milson - a member on here makes them and sells them on Ebay, about £30 for a custom made jobbie in your choice of trim colours. He will send you a
plan wiht detailed measurements on it which you send back and he makes it from that.
I've got one and very pleased with it.
|
|
|
Lars
|
| posted on 16/2/10 at 04:19 PM |
|
|
I would recommend milson too
|
|
|
TimC
|
| posted on 16/2/10 at 05:28 PM |
|
|
Milson made one for my old MNR. Please note that it's not fastened down in this picture:
My only tip is, if you want zips or anything putting into it, pay Milson to do it. I didn't think about it and then spent ages trying to find
someone local to me to do it.
|
|
|
coozer
|
| posted on 16/2/10 at 06:37 PM |
|
|
I want one too please....
1972 V8 Jago
1980 Z750
|
|
|
Krismc
|
| posted on 16/2/10 at 07:25 PM |
|
|
Me too they look good.
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
doddy
|
| posted on 16/2/10 at 07:29 PM |
|
|
this one
http://cgi.ebay.co.uk/rear-tonneau-boot-cover-tiger-locost-kitcar-westfield_W0QQitemZ270519801469QQcmdZViewItemQQptZUK_CarsParts_Vehicles_CarParts_SM?
hash=item3efc3c967d
|
|
|
RichardK
|
| posted on 16/2/10 at 07:39 PM |
|
|
Yep, Milsons yer man or rather his missus is! Great customer service when some muppet gave him the wrong measurement!
Rich
Gallery updated 11/01/2011
|
|
|
Krismc
|
| posted on 16/2/10 at 08:47 PM |
|
|
Standard roll bar only?? thats the MNR out then cause ive got 2 rear stays.
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
daniel mason
|
| posted on 16/2/10 at 08:55 PM |
|
|
thats why the zips are needed. he will do them too!
|
|
|
coozer
|
| posted on 16/2/10 at 09:02 PM |
|
|
quote:
Originally posted by Krismc
Standard roll bar only?? thats the MNR out then cause ive got 2 rear stays.
THIS! one for rear stays...
1972 V8 Jago
1980 Z750
|
|
|
Krismc
|
| posted on 16/2/10 at 09:09 PM |
|
|
cheers steve.
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
RK
|
| posted on 16/2/10 at 11:24 PM |
|
|
This didn't take me long. Course it shows! But not that hard so I'd go for it. The material is not expensive.
That said, Milson would be next on my list.
Can't do pics. I'm the wrong side of 50 for that. Anyhow, it isn't professional, but it was basically free.
[Edited on 16/2/10 by RK]
|
|
|
