RogerL
|
| posted on 27/12/10 at 07:29 AM |
|
|
First Start MNR Zetec
Hooray we finally started the motor !
After a long time I finally finished the Zetec engine install. This has a Haltec ECU and Suzuki Throttle bodies. My son and I started it Christmas
day. A great Christmas present. This is MNR number 049. I had a lot of distractions but finally had our big moment. My son has been away in
college so I did most of the sorting and fabrication myself; between job and house remodeling. It is definitely worth the effort.
We are in sunny southern California. Will post some pics of car on the road soon.
Cheers Thanks to everyone on the Vortx site. I got lots of help from your posts.
Roger
http://www.youtube.com/watch?v=u1Y_n8RQOnw
|
|
|
|
|
LBMEFM
|
| posted on 27/12/10 at 07:53 AM |
|
|
Congratulations on the engine start, sitting here in dull, grey and freezing England California sounds a great place to be, but I'm not
envious
|
|
|
imp paul
|
| posted on 27/12/10 at 09:13 AM |
|
|
well done sounds like good fun lots of hard work put some picys up 
|
|
|
ashg
|
| posted on 27/12/10 at 11:17 AM |
|
|
never heard of haltec. well done on getting it running. did you have a base map or did you start with nothing?
Anything With Tits or Wheels Will cost you MONEY!!
Haynes Roadster (Finished)
Exocet (Finished & Sold)
New Project (Started)
|
|
|
Strontium Dog
|
| posted on 28/12/10 at 11:22 AM |
|
|
Haltech ECU's
http://www.haltech.com/ 
[Edited on 28/12/10 by Strontium Dog]
|
|
|
Johneturbo
|
| posted on 28/12/10 at 12:45 PM |
|
|
Congrats on the first start up
i'm not jealous either i mean lovely hot sunshine nice smooth roads
|
|
|
RK
|
| posted on 29/12/10 at 03:37 AM |
|
|
Haltech are Aussies.
|
|
|
first350
|
| posted on 2/1/11 at 12:59 PM |
|
|
very cool!!! I've been to Carlsbad before (went to school in California, so lots of friends down in SD area)- nice area!
|
|
|
Cobra289
|
| posted on 5/5/20 at 07:36 PM |
|
|
quote:
Originally posted by RogerL
Hooray we finally started the motor !
After a long time I finally finished the Zetec engine install. This has a Haltec ECU and Suzuki Throttle bodies. My son and I started it Christmas
day. A great Christmas present. This is MNR number 049. I had a lot of distractions but finally had our big moment. My son has been away in
college so I did most of the sorting and fabrication myself; between job and house remodeling. It is definitely worth the effort.
We are in sunny southern California. Will post some pics of car on the road soon.
Cheers Thanks to everyone on the Vortx site. I got lots of help from your posts.
Roger
http://www.youtube.com/watch?v=u1Y_n8RQOnw
Hello,
I am investigating if the Haltec Elite 750 ECU will be my option.
I can't find by Haltec a "Base Map" for a Zetec 2.0L
Did you develop the full map?
Perhaps you can help me with your experience and perhaps with the Base Map.
My engine setup is identical you yours.
Thanks in advance.
Carlos (The Netherlands)
|
|
|
CosKev3
|
| posted on 6/5/20 at 07:31 AM |
|
|
quote:
Originally posted by Cobra289
quote:
Originally posted by RogerL
Hooray we finally started the motor !
After a long time I finally finished the Zetec engine install. This has a Haltec ECU and Suzuki Throttle bodies. My son and I started it Christmas
day. A great Christmas present. This is MNR number 049. I had a lot of distractions but finally had our big moment. My son has been away in
college so I did most of the sorting and fabrication myself; between job and house remodeling. It is definitely worth the effort.
We are in sunny southern California. Will post some pics of car on the road soon.
Cheers Thanks to everyone on the Vortx site. I got lots of help from your posts.
Roger
http://www.youtube.com/watch?v=u1Y_n8RQOnw
Hello,
I am investigating if the Haltec Elite 750 ECU will be my option.
I can't find by Haltec a "Base Map" for a Zetec 2.0L
Did you develop the full map?
Perhaps you can help me with your experience and perhaps with the Base Map.
My engine setup is identical you yours.
Thanks in advance.
Carlos (The Netherlands)
You might not get a reply if the people above are no longer on here,this thread is from 2010
|
|
|
Cobra289
|
| posted on 6/5/20 at 07:38 AM |
|
|
quote:
Originally posted by CosKev3
quote:
Originally posted by Cobra289
Hello,
I am investigating if the Haltec Elite 750 ECU will be my option.
I can't find by Haltec a "Base Map" for a Zetec 2.0L
Did you develop the full map?
Perhaps you can help me with your experience and perhaps with the Base Map.
My engine setup is identical you yours.
Thanks in advance.
Carlos (The Netherlands)
You might not get a reply if the people above are no longer on here,this thread is from 2010
Thanks I will start a new thread.
|
|
|
.JPG)
