Eatpies99
|
| posted on 24/8/11 at 09:57 PM |
|
|
Vortx chassis length and width
Hi guys/girls
Hopefully picking up the first part of my Vortx early september. Im (thats a lie) going to build a small metal frame to build it on so i can wheel it
round the garage (need to fit another car in too and its a squeeze). If someone could quickly let me know the dimensions of the chassis/car so i
(another lie) can get cracking.
thanks 
|
|
|
|
|
Pdlewis
|
| posted on 25/8/11 at 07:42 AM |
|
|
I just measured mine this weekend to see if it fits in my new garage.
it is fully built so will be a bit longer than the bare chassie because of the nose etc
Width: 170cm
length 340cm
Build Photo Album
Updated 05/02/2009
|
|
|
Eatpies99
|
| posted on 25/8/11 at 07:49 AM |
|
|
Thanks mate
|
|
|
Patrick V.d. Langenbergh
|
| posted on 25/8/11 at 11:24 AM |
|
|
Hi,
I've done the same. The cart was very helpful in my small workshop (there's a wall between the two garages...). By the end of the
building, it was difficult to move the cart becouse of the weight of the car. Next time I would use nylon wheels instead of rubber ones...
 
MNR chassis on movable frame
The chassis (without suspension parts) meassures 3060 x 1040...
For more pictures, visit my building site (in Dutch...) www.mnr-racing.be
Regards
Patrick
Happy with Honda
Follow our buildingsite www.mnr-racing.be
|
|
|
Eatpies99
|
| posted on 25/8/11 at 06:06 PM |
|
|
Thanks for that Patrick
|
|
|
