smart51
|
| posted on 19/6/05 at 03:05 PM |
|
|
4 point harness lower mounting points
Were and how do I mount the lower ends of my 4 point harnesses? The upper points moint to threadded tubes welded to the chassis. the lowers I
don't know.
|
|
|
|
|
marc n
|
| posted on 19/6/05 at 06:43 PM |
|
|
drill through the 4mm steel corner plates welded in the chassis and use your harness eyes with nuts ( we have these in stock ) use a nut either side
of the chassis plate to lock the belt eye in place
best regards
marc
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
