JoaoCaldeira
|
posted on 12/4/06 at 05:01 PM |
|
|
Rear wing piping
Hi all.
Does anyone have a pic / link / ... for the piping used in the rear wing?
Thanks in advance,
Joao
|
|
|
stevec
|
posted on 12/4/06 at 05:23 PM |
|
|
Heres one, But there are many others.
http://www.lolocost.com/ASPpages/part_details.asp?PartID=117
|
|
Krismc
|
posted on 12/4/06 at 05:42 PM |
|
|
there moto is putting the low into lowcost.....
....yet P&P is £6!!!!!!
ive just payed £8 for my 2 seats with runners!
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
stevec
|
posted on 12/4/06 at 06:30 PM |
|
|
Being as the guy is in Portugal that could be a bargain.
I ordered a shed load of stuff and the postage was still £6
[Edited on 12/4/06 by stevec]
|
|
Krismc
|
posted on 12/4/06 at 06:47 PM |
|
|
thats ok to portugal i suppose, but not within uk for a bit of rubber!
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
Johnmor
|
posted on 12/4/06 at 08:12 PM |
|
|
Piping
Try http://www.woolies-trim.co.uk/
Fats service and better than £6 for 3m
9 mm may be a bit big, they have different sizes and different profiles
I used 6mm looks Ok and easier to handle
|
|
JoaoCaldeira
|
posted on 12/4/06 at 08:30 PM |
|
|
Is this it?
Thanks for your replys.
So, what I need is something like
PVC Wing Piping. Hollow bead 6mm (¼" dia. With 25mm (1" flange
Right?
Thanks again,
Joao
|
|
Chippy
|
posted on 12/4/06 at 10:02 PM |
|
|
Hi Joao, yep thats the gear. Regards Chippy
|
|