Howlor
|
| posted on 25/4/06 at 07:45 AM |
|
|
Which centre rear view mirror MNR?
Hi,
Which style of centre rear view mirror have people used for SVA? I have tried a suction cup style and it doesn't angle correctly when mounted on
the MNR scuttle unless you wish to see pursuing helicopters!
Thanks,
Steve
|
|
|
|
|
Agriv8
|
| posted on 25/4/06 at 09:06 AM |
|
|
We use a modified sierra one.
procedure as follows.
Nip down scrap yard pull mirror and mounting arm off sierra ( I am sure others are usable ).
Cut the plate off ( where you would stick the sticky pad on and atah to screen )
sleave the other end with a peice of tube and 5-6 inches. stick in place or mash up the tube so the mirror end cant move.
other end of the tube inseret / stick / weld an m5 or m6 bolt in.
Bolt through scuttle ( this can be replaced with the single bolt one when the SVA one falls off ) as shown on many of the MNR cars.
Sure Marc / chris will let you borrow one
will see if I have a photo
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
Howlor
|
| posted on 25/4/06 at 09:23 AM |
|
|
Cheers I will give Chris a call.
|
|
|
shortie
|
| posted on 25/4/06 at 09:32 AM |
|
|
Why not just use a suction one, couple of quid in Wilkinsons or about 8 quid in Halfrauds, was fine for my SVA!
Rich.
|
|
|
Howlor
|
| posted on 25/4/06 at 09:58 AM |
|
|
The angle of the MNR scuttle means it wont adjust far enough down to see the road behind.
Steve
|
|
|
shortie
|
| posted on 25/4/06 at 12:47 PM |
|
|
aha! that'll be a problem then :-)
|
|
|
DorsetStrider
|
 posted on 25/4/06 at 01:39 PM |
|
|
quote:
Originally posted by Howlor
The angle of the MNR scuttle means it wont adjust far enough down to see the road behind.
Steve
There's a road BEHIND!?!?!?!?!?!?
|
|
|
