Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: how hard are you
alanr

posted on 4/8/06 at 08:08 AM Reply With Quote
how hard are you

This is going to sound like a strange questiong to be asking - but you bike engined guys out there - how much stick do you give the engine - do you push it to the limit all the time (Marc told me he does) or are you gentle sometimes

Everytime I'm out in driving it semms to want to be driven hard all the time in every gear and at 8000+ is as sweet as a nut

A



[Edited on 4/8/06 by alanr]

View User's Profile View All Posts By User U2U Member
DIY Si

posted on 4/8/06 at 08:41 AM Reply With Quote
Full beans all the time once warm. Unless the missus is there as I get told off for using too much fuel!
View User's Profile E-Mail User View All Posts By User U2U Member
Agriv8

posted on 4/8/06 at 08:53 AM Reply With Quote
Once the, oil presure, oil temp, water temp are up there.

Thrash the knackers of it ( unless the wife is in and I get screemed at ).

My engine is hopfully coming out over winter for a new one sod the fuel consumption.

not a bike engine I know but you have got to make the most of it.

regards

Agriv8





Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a tree full of a*seholes .............


View User's Profile View All Posts By User U2U Member
2Fast

posted on 4/8/06 at 09:18 AM Reply With Quote
I give it a few minutes, then 'ave it large (within the speed limit of course ), then give it a few more minutes to cool off before turning it off.
View User's Profile View All Posts By User U2U Member
smart51

posted on 4/8/06 at 11:24 AM Reply With Quote
I drive gently along the little roads near my house but once on the open road I let it have it. The car is only good for one thing and that is full thottle to high revs acceleration. You just have to use it as intended.
View User's Profile View All Posts By User U2U Member
cadebytiger

posted on 4/8/06 at 01:52 PM Reply With Quote
I am always worid that it will overheat if i thrash it too much. I guess there is only one way to find out.

If it will dit in traffic though i guess a good thrash would do it good. Saying that though it is bloody loud at the moment due to the silencer having burnt out

maybe i will get a new one of those first!

Rupet

View User's Profile View All Posts By User U2U Member
JUD

posted on 4/8/06 at 03:08 PM Reply With Quote
I drive like a vicar - never exceeding 3000rpm.....



....NOT

View User's Profile View All Posts By User U2U Member
G.Man

posted on 4/8/06 at 03:55 PM Reply With Quote
Mine gets warmed up in the garage before pulling away, then it gets thrashed to within an inch of its life...

I love lighting the tyres up at every oppotunity, so much so that I now get cheers of approval wherever I go in Nicosia..

Sadly I have killed the clutch now and awaiting a new barnett clutch from the US...

Wont take long to fit, and the new pace 4 row race rad will go in at the same time...







Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!

View User's Profile View All Posts By User U2U Member
smart51

posted on 4/8/06 at 04:18 PM Reply With Quote
quote:
Originally posted by cadebytiger
I am always worid that it will overheat if i thrash it too much.


Do you have the radiator supplied by MNR? I wouldn't worry. I have one on my R1 engined car and in really hard driving the water temperature at the rad is always low, even on a really hot day. Motorway speeds cool it down even more. Only when stationary does the temperature rise.

View User's Profile View All Posts By User U2U Member
marc n

posted on 4/8/06 at 05:42 PM Reply With Quote
drove it like you stole it

i absolutely thrash the knackers off mine everytime i use it thats what they are there for





please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
OX

posted on 4/8/06 at 07:17 PM Reply With Quote
full beans most of the time
View User's Profile View All Posts By User U2U Member
rjbrookes

posted on 5/8/06 at 12:36 PM Reply With Quote
mine dont go about 3rpm at the moment

cant fix it until i fix myself so i can walk again....

but plan to thrash the thing once both man and machine are in in tip top shape.....



russ

View User's Profile E-Mail User View All Posts By User U2U Member
mnr laptop

posted on 5/8/06 at 12:50 PM Reply With Quote
whats happened russ ???
quote:

so i can walk again....



[Edited on 5/8/06 by mnr laptop]

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile Visit User's Homepage View All Posts By User U2U Member
rjbrookes

posted on 5/8/06 at 02:24 PM Reply With Quote
quote:
Originally posted by mnr laptop
whats happened russ ???
quote:

so i can walk again....



prolapsed a disc in my back again!!!! i think the car is punishing me for taking it around the ring! but its all nearly fixed again, driveshalfs all back on just wheels to go on, cooling to sort and it will need alignment again!!!!!

think i will do a track day at the end of the month to cheer myself up again......now where did my pain killers go??????

russ

View User's Profile E-Mail User View All Posts By User U2U Member
Krismc

posted on 5/8/06 at 02:50 PM Reply With Quote
best of luck with the recovery mate!! i know sumone in the same state as you are at the moment and all i can say is...

OOUCH!!





Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.

View User's Profile View All Posts By User U2U Member
mnr laptop

posted on 5/8/06 at 03:17 PM Reply With Quote
quote:

prolapsed a disc in my back again!!!!



yep thats gonna hurt !!!!!!!!!!

hope you get better soon

best regards

marc

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile Visit User's Homepage View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.