coozer
|
| posted on 15/1/08 at 04:33 PM |
|
|
Dash Bottom Radius
Hows the bottom of the dash for SVA? Does it pass as is or does it need some 'modification'
I can smell the finishing line now... 
Steve
1972 V8 Jago
1980 Z750
|
|
|
|
|
kev R1
|
| posted on 15/1/08 at 04:53 PM |
|
|
yeah looks great with my special x-ray specs!
|
|
|
02GF74
|
| posted on 15/1/08 at 05:00 PM |
|
|
I can't see anything wrong. 
|
|
|
worX
|
| posted on 15/1/08 at 05:03 PM |
|
|
Well since you are posting clearly in the MNR section I'll assume you are referring to the MNR Dashboard? Then Yes they pass OK - the only thing
you may have to do (for a fussy examiner?) is to put U Trim on the underside edge, but just take some spare and do it while your there...
Steve
|
|
|
coozer
|
| posted on 15/1/08 at 05:17 PM |
|
|
Sorry chaps, I was indeed on about the MNR dash!
Thanks,
Steve
1972 V8 Jago
1980 Z750
|
|
|
TimC
|
| posted on 15/1/08 at 05:37 PM |
|
|
Getting close now Steve!!!
|
|
|
coozer
|
| posted on 15/1/08 at 05:59 PM |
|
|
How close are you Tim? Considering your cheating now!
Steve
1972 V8 Jago
1980 Z750
|
|
|
TimC
|
| posted on 15/1/08 at 06:45 PM |
|
|
I'd be right up with you if my uprights hadn't gone missing in the post for 50-odd days.
The bodywork is on. The back-end is almost there. Front is awaiting machined uprights and pins, need to finish the plumbing and then set the whole
thing up.
.JPG)
Close!
[Edited on 15/1/08 by TimC]
|
|
|
