bassett
|
| posted on 19/3/08 at 06:55 PM |
|
|
Springs and dampers
Hi, with the RT inboard are the front springs and dampers (12inch) the fronts and the longer at the rear?
Cheers
Adam
My MNR Blog Updated Jan 2010 - Track Day Prep Begins!
|
|
|
|
|
stuart_g
|
| posted on 19/3/08 at 07:00 PM |
|
|
Yes
|
|
|
bassett
|
| posted on 19/3/08 at 07:16 PM |
|
|
Thanks again Stuart. Also a query with the pivoting arms, if your looking at one side only is it cylindrical radial bearing then radial thrust bearing
then thrust washer then another radial thrust bearing as i havent got the manual?
Cheers
Adam
My MNR Blog Updated Jan 2010 - Track Day Prep Begins!
|
|
|
stuart_g
|
| posted on 19/3/08 at 07:41 PM |
|
|
Yes it is according to the manual although I can't remember fitting that many bearings or even having that many bearings in the kit
I'm off to check now..........
Mine are as below...phew.
[Edited on 19/3/08 by stuart_g]
|
|
|
vinny1275
|
| posted on 19/3/08 at 08:09 PM |
|
|
I remember the manual's slightly wrong, this is what I had from Marc when I fitted mine:
instructions are wrong you have the correct amount, should be fitted washer , roller bearing, washer
HTH
Vince
|
|
|
GeorgeM
|
| posted on 19/3/08 at 08:59 PM |
|
|
as above, washer, bearing, washer. Manual
has them other way round.
ssh, MNR got something wrong  
|
|
|
bassett
|
| posted on 19/3/08 at 11:46 PM |
|
|
Cheers guys that does sound more logical and just aswell i didnt get time for that job tonight or i could easily have spent a few hours looking
through the rest of the unopened boxes for the extra washers.
Adam
My MNR Blog Updated Jan 2010 - Track Day Prep Begins!
|
|
|
