clutch_kick
|
posted on 26/2/07 at 03:36 PM |
|
|
Just out of curiosity ... can you have the RT front based on the cortina?
|
|
|
jcduroc
|
posted on 26/2/07 at 03:59 PM |
|
|
quote: Originally posted by clutch_kick
Just out of curiosity ... can you have the RT front based on the cortina?
No prob at all.
JCM
|
|
Agriv8
|
posted on 26/2/07 at 04:58 PM |
|
|
I hope so !!! ( Ok actually I know Yes they do ).
The Racleada is very similar ( dimensionally ) to the Cortina.
I have a pair of 'Tina hubs that I have just spent Ages cleaning up and removing the broken studs. Destined for My Vortx
regards
Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
chockymonster
|
posted on 26/2/07 at 09:41 PM |
|
|
quote: Originally posted by Agriv8
I hope so !!! ( Ok actually I know Yes they do ).
The Racleada is very similar ( dimensionally ) to the Cortina.
I have a pair of 'Tina hubs that I have just spent Ages cleaning up and removing the broken studs. Destined for My Vortx
regards
Agriv8
would this be the time to say I'm about to sell a set with new bearings in
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|
Agriv8
|
posted on 26/2/07 at 10:16 PM |
|
|
The uprights just finished painting all studs extracted.
hubs bearings and brakes now i would be intrested !!!
U2U if req
regards
Agriv8
[Edited on 26/2/07 by Agriv8]
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
clutch_kick
|
posted on 27/2/07 at 03:50 PM |
|
|
well i cleaned up the uprights, de-rusted them with electrolysis, brand new now. I chucked away the calipers and hubs though, the weight of those
things is appalling!! Hi-Spec do some very nice light alloy bits
|
|
G.Man
|
posted on 27/2/07 at 04:25 PM |
|
|
quote: Originally posted by clutch_kick
well i cleaned up the uprights, de-rusted them with electrolysis, brand new now. I chucked away the calipers and hubs though, the weight of those
things is appalling!! Hi-Spec do some very nice light alloy bits
Raceleda do some nice cheaper ones
Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!
|
|