SALAD
|
| posted on 7/9/10 at 11:59 AM |
|
|
C20XE to Type 9
Just need a couple of part numbers....
OK, list of required parts as I understand it:
Standard XE Cover Plate (Pressure Plate) - Early or late type dependent on what flywheel used.
Sierra 2.3 Diesel Friction Plate (Driven Plate) - Or another 23 spline plate (Check thickness).
Standard Sierra / Ford Release Bearing - QH CCT132??
RS2000 Clutch Fork
Vauxhall Spiggot Bush / Bearing - NUMBER??
Capri Short Adjustable Cable.
SBD / QED / Yukspeed Bellhousing.
Can anyone confirm the Ford release bearing number and let me know the Vauxhall spiggot bush / bearing number please?? I have most of the other bits.
|
|
|
|
|
ruudbeckers
|
| posted on 7/9/10 at 03:41 PM |
|
|
I decided to go for a hydraulic clutch, so I have a clutch fork and release bearing for sale. I did fit it to my car, but I am still building it so it
has zero miles on it. I bought it from Yukspeed for 57 pounds. You can have it for 35 pound posted to the UK.
|
|
|
joolsmi16
|
| posted on 7/9/10 at 04:11 PM |
|
|
c20xe
Hi if you ring Yuk at Yukspeed on 01653618540 just ordered all the bits for mine. very helpful guy and good prices.
Also stevegough may be along in a bit to answer all questions.
Jools
|
|
|
SALAD
|
| posted on 7/9/10 at 05:35 PM |
|
|
Thanks chaps but I already have the fork and I have ordered other bits from Yukspeed and he is a good bloke to deal with but I just need the correct
part numbers so I can go to my local motorfactors and pick up the bearings / bushes.
|
|
|
joolsmi16
|
| posted on 7/9/10 at 06:06 PM |
|
|
c20xe
Try this link for all part No.s http://westfield-world.com/xeparts.html
Jools
|
|
|
SALAD
|
| posted on 7/9/10 at 07:38 PM |
|
|
Good link Jools!
Still not sure of the Vauxhall Spigot bearing number but that is a useful site.
Thanks.
|
|
|
stevegough
|
| posted on 7/9/10 at 09:05 PM |
|
|
Link for spigot bearing - QED motorsport
QED
Link to SBD site - spigot / release brg / arm
SBD
Sorry, Not sure of actual part numbers. - Got my clutch from Yuk. - I have heard the one about the 2.3D, too but not sure if it is correct - told Yuk
T9 to C20XE and he supplied the right one. Be careful - I ended up buying quite a few bits which proved hearsay to be sometimes infuriatingly
wrong.....
Just remembered - I have a new spigot bearing if you want - £6 posted.
Any more questions, ask away!
Luego Locost C20XE.
Build start: October 6th 2008.
IVA passed Jan 28th 2011.
First drive Feb 10th 2011.
First show: Stoneleigh 1st/2nd May 2011.
'Used up' first engine may 3rd 2011!
Back on the road with 2nd engine may 24th
First PASA mad drive 26/7/11
Sold to Mike in Methyr Tydvil 19/03/14
|
|
|
