cossiebri
|
posted on 13/2/11 at 10:23 PM |
|
|
For sale R1 turbo locost
After lot's of mulling over, thinking,talking with the wife, And thanks to flak monkey-looking at that sv650- i think it's time to put the
car up for sale
I wan't a few more toy's but can't really afford to have them all so something got to go
Right it's a 4xv R1 with j e low comp pistons, carillo rods, Think it's running a set of custom cams as well, fuelling is by suzuki
gsxr1000 (k1 ? i think) throttle bodies running with a kms ecu that also takes care of the ign, closed loop lamda, dash display, boost controller (the
ecu set up cost over £1500 alone) When i bought the engine it was using pectal (read ford cosworth set up) but talking to the engine builder (ashford
motorsport) when the engine was being dyno'ed it didn't seem to like the single throttle body- causing surging so was told this is the
better route,the turbo is a switzer (?sp)
it has a custom pace intercooler, swirl pot, injection pump, carbon micron(large oval) race can, all boost hoses are blue silicone,alloy dump valve
All of this was bought brand new
also new on the car is a lightweight floor mounted pedalbox from apb on here, trigger handbrake, golf 1.4 rad (same as the polo one but the core is
twice as thick) vapor dash, boost gauge
the car has carbon mods front cycle wings, carbon wing protectors,carbon f1 mirrors, light weight fibreglass seats with foam padding,sabelt black
harnesses,wilwood 4 piston front calipers, running on 6 x13 5 spoke alloys with r888 (have seen better days but loads of tread still)
the bad news is the car could do with a tidy esp the wiring, It NEEDS to be mapped either on a rolling road or engine out and dyno'ed(this was
the route i was taking. ashford motorsport has a dyno room-they built the engine and supplied the ecu etc so know it very well) I think it could do
with a custom fuel rail as was never happy with whats on there (was going to get one from flak monkey) The car does run-hasn't been started
since last august but obviously will be run for the buyer, the tickover is almost spot on just needs the rest of the map sorting (it's running
on a blackbird turbo map at the moment just to get it running) Should be running around 260-280 hp at around 8-10 psi can run over 20 psi if you
want
Looking for £4250 (spent more than that on the engine conversion alone!!)
http://www.locostbuilders.co.uk/gallery/100_1844%20[1600x1200].JPG
http://www.locostbuilders.co.uk/gallery/100_1845%20[640x480].JPG
http://www.locostbuilders.co.uk/gallery/100_1846%20[640x480].JPG
http://www.locostbuilders.co.uk/gallery/100_1848%20[640x480].JPG
http://www.locostbuilders.co.uk/gallery/100_1849%20[640x480].JPG
http://www.locostbuilders.co.uk/gallery/100_1850%20[640x480].JPG
Cheers zilspeed forgot to add it IS road registered on a Q plate !
can't seem to get the pic's working they are in my archive if any one can help?
phone me on 07905 130069 or send u2u
[Edited on 13/2/11 by cossiebri]
[Edited on 13/2/11 by cossiebri]
If it doesn't fit MODIFY it!!
Cheers BriF
Is this a TRADE ADVERTISEMENT?? Click HERE to report it!
|
|
|
zilspeed
|
posted on 13/2/11 at 10:41 PM |
|
|
Booooo
I remember it when it had a xflow.
Did you mention it's a road registered car ?
Hope the new owner stays in touch, whoever it ends up with.
I was owner two, you'll be owner five, I think.
Who's up next ?
|
|
Strontium Dog
|
posted on 13/2/11 at 10:58 PM |
|
|
Ooh, sounds cheap! Send it to me and I'll map it and get it IVA'd. Got to be worth more if finished! If I had the money spare at the
moment I'd be interested myself!
|
|
Strontium Dog
|
posted on 13/2/11 at 10:59 PM |
|
|
quote: Originally posted by zilspeed
Booooo
I remember it when it had a xflow.
Did you mention it's a road registered car ?
Hope the new owner stays in touch, whoever it ends up with.
I was owner two, you'll be owner five, I think.
Who's up next ?
If it's road legal it's gotta be too cheap!
|
|
eddie99
|
posted on 13/2/11 at 11:02 PM |
|
|
Bargain... i bet it will be snapped up quick!
http://www.elitemotorsporteng.co.uk/
Twitter: @Elitemotoreng
Facebook: http://www.facebook.com/pages/Elite-Motorsport-Engineering/153409081394323
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Dangle_kt
|
posted on 13/2/11 at 11:51 PM |
|
|
That is CRAZY cheap!
|
|
tony-devon
|
posted on 14/2/11 at 08:12 AM |
|
|
think your ripping yourself off mate
I have seen cars nowhere near as well specced as that fetch more money
and its on a Q plate.
way too cheap, although not cheap enough for me to afford it LOL
maybe its not the right approach, but personally I would be removing the VIN etc, sell as a track car or project, will still make that money, then
keep V5 etc for another project, or maybe sell on.?
heavy is good, heavy is reliable, and if it breaks, hit them with it
|
|
carpmart
|
posted on 14/2/11 at 09:11 AM |
|
|
quote: Originally posted by tony-devon
think your ripping yourself off mate
I have seen cars nowhere near as well specced as that fetch more money
and its on a Q plate.
way too cheap, although not cheap enough for me to afford it LOL
maybe its not the right approach, but personally I would be removing the VIN etc, sell as a track car or project, will still make that money, then
keep V5 etc for another project, or maybe sell on.?
This is illegal.
You only live once - make the most of it!
Radical Clubsport, Kwaker motor
'94 MX5 MK1, 1.8
F10 M5 - 600bhp Daily Hack
Range Rover Sport - Wife's Car
Mercedes A class - Son's Car
|
|
tony-devon
|
posted on 14/2/11 at 09:58 AM |
|
|
yeah and LOL
of course your correct it is illegal, but it happens, many times you see a kitcar for sale, obviously been on the road, but without plates and
paperwork.
I wasnt saying thats what he should do, or advocating it, but merely mentioning that it was an option.
seeing as he appears to be giving the car away almost, at that price.
[Edited on 14/2/11 by tony-devon]
heavy is good, heavy is reliable, and if it breaks, hit them with it
|
|
cossiebri
|
posted on 14/2/11 at 12:04 PM |
|
|
Could also have it delivered if needed for a small charge
If it doesn't fit MODIFY it!!
Cheers BriF
|
|
JoelP
|
posted on 14/2/11 at 08:15 PM |
|
|
Looks a bit nicer than when i sold you it!
Suspect you could charge loads more if you got it running right.
|
|
cossiebri
|
posted on 15/2/11 at 08:44 PM |
|
|
Cheers joelp, had a lot of fun with it should never have taken the old engine out UNTIL i had everything for the new one- only been off the road 3
years !! let that be a lesson (or not)
Look's like the car is sold
[Edited on 15/2/11 by cossiebri]
If it doesn't fit MODIFY it!!
Cheers BriF
|
|
cossiebri
|
posted on 20/2/11 at 08:00 AM |
|
|
Car is SOLD!
If it doesn't fit MODIFY it!!
Cheers BriF
|
|