Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: residential electrical questions
ruskino80

posted on 20/5/15 at 09:09 PM Reply With Quote
residential electrical questions

hi, just doing a kitchen refurb for a customer and the electrician has blobbed on me.

the old oven was plugged in via a 13a plug
the new oven (2.4 kw so only 10 amps) requires min 3 core 1.5 mm flex h/r. question is can I simply install the new flex back into a 13amp plug? on the existing wiring the socket beneath the countertop is controlled by a 13 amp switch fused spur fitted above the top which is spurred of the dedicated kitchen ring.

second question is that I know installing the new oven is not notifiable based on not altering the supply but can I install it myself?

I am not an electrician, I am not part p registered but I do deem myself competent.

thanks for any help

rich

View User's Profile View All Posts By User U2U Member
tegwin

posted on 20/5/15 at 09:48 PM Reply With Quote
Theres a 13 A socket behind the oven isn't there? So you can quite easily plug in the new oven without doing any wiring can't you?





------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!

www.verticalhorizonsmedia.tv

View User's Profile Visit User's Homepage View All Posts By User U2U Member
daniel mason

posted on 20/5/15 at 09:52 PM Reply With Quote
Youl still ned to terminate connections in the back of the oven!
View User's Profile E-Mail User View All Posts By User U2U Member
JoelP

posted on 21/5/15 at 06:45 AM Reply With Quote
Most sub 13a ovens come with the flex fitted. I'd fit it without a second thought, it's not notifiable.






View User's Profile View All Posts By User U2U Member
Slimy38

posted on 21/5/15 at 07:28 AM Reply With Quote
We had the same with our cooker, although I changed the wall plate for an oven junction box (I don't know the proper term) so it was fully wired in rather than just plugged in. Possibly a bit overkill but apart from anything the plate was more flush with the wall so the oven fitted better.
View User's Profile View All Posts By User U2U Member
britishtrident

posted on 21/5/15 at 12:08 PM Reply With Quote
Plug -- if you use the oven to any great extent at some point you will need to pull it out an fit a new heating element which only takes 5 minutes if you can just pull it out and unplug it..





[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]

View User's Profile View All Posts By User U2U Member
britishtrident

posted on 21/5/15 at 12:11 PM Reply With Quote
quote:
Originally posted by JoelP
Most sub 13a ovens come with the flex fitted. I'd fit it without a second thought, it's not notifiable.


That was certainly the case with the Baumatic we fitted a couple of years back.





[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.