tompat3463
|
| posted on 28/10/17 at 10:56 AM |
|
|
13" pro race 1.2 on a vortx
Has anyone got a picture of a vortx with 13 pro race 1.2 ?
I was going to go for 15s but after a good chat with Andy Bates he's just about talked me into 13"
The advantages he has stated are out weighing the looks of the 15s but I don't want it to look daft hence this post.
Thanks Alan
|
|
|
|
|
kingster996
|
| posted on 28/10/17 at 11:07 AM |
|
|
13” wheels look perfect on any “seven” so I would just get them!
I used to be indecisive, but now I'm not so sure
|
|
|
CosKev3
|
| posted on 28/10/17 at 05:02 PM |
|
|
I'm with Chris,look great on any seven type car!
|
|
|
gaz_gaz
|
| posted on 28/10/17 at 05:46 PM |
|
|
3rd'd
13s over 15s every day of the week
|
|
|
Matt21
|
| posted on 28/10/17 at 09:49 PM |
|
|
if you run a 13" wheel on the rear with a 205/60/13 tyre, its exactly the same diameter as a 195/50/15, so it fills the arch the same as a
15" set up would
If you run a 185/60/13 on the front you lose 1" off the overall diameter, which is also hardly noticeable.
Instagram: @matt211988
Photobucket
My YouTube
|
|
|
kingster996
|
| posted on 29/10/17 at 08:11 AM |
|
|
Check that you can get PR 2 in the right offset. I think they only do 13” in et23?
Cxrs as in the photo might be better and look great!
[Edited on 29/10/17 by kingster996]
Actually I think PR 1.2 are available in up to et38 so should fit.
[Edited on 29/10/17 by kingster996]
I used to be indecisive, but now I'm not so sure
|
|
|
