Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Its Alive..........
amalyos

posted on 4/7/06 at 02:25 PM Reply With Quote
Its Alive..........

Finally sorted out the electrical problem. I had to link out the feed to the ECU from the original ignition switch, as I don't have one, but it worked and I've got sparks
Now I'm stuck in Turin with work, so I'll have to wait until Thursday night to put some fuel in it and upset the neighbours.

Steve

View User's Profile E-Mail User View All Posts By User U2U Member
marc n

posted on 4/7/06 at 02:28 PM Reply With Quote
good stuff

nearly ready for first test drive





please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com

NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
amalyos

posted on 6/7/06 at 09:34 PM Reply With Quote
Fuelled up and running.
Thanks for your help Dion.
It is running a bit rough, and it seems as though number 1 cyl is not running right as the manifold is not getting anywhere near as hot as 2,3 & 4.
Tried swapping the plugs, but it didn't improve.
Checked the plug cap and lead, they seem ok, does anyone have any other ideas? could it be fuelling?

View User's Profile E-Mail User View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.