Rick James
|
posted on 24/2/07 at 06:27 PM |
|
|
MNR Module kit
Hello people, I'm new to this forum. I've just been having a look at the MNR Website and found a bit on there about the Vortx RT Module
kit that they do, the example they have is for a BEC, it lists the various stages but doesn't give any more info than that.
Was just wondering if anyone knows what happens with rgeards to the Module Kit. Thanks everyone.
|
|
|
coozer
|
posted on 24/2/07 at 07:08 PM |
|
|
Welcome, but, what do you mean? I have just got my MNR 2 weeks ago and it is really up to you what you want.
I went through the list of parts with Chris and just picked the items I wanted to get me away. I'll be going back later when funds allow and I
require the next few parts to progress the build.
When you place your order you go through every thing required and say yes or no not now.
This means you can make the modules up to suit yourself.
I'm using a zetec engine in mine and I left the engine for them to fit it. It means my car is custom built for me.
I've only just started but check out my blog below to follow the build...
1972 V8 Jago
1980 Z750
|
|
Rick James
|
posted on 24/2/07 at 08:43 PM |
|
|
I'll have to ckeck it out. Going to source the donor parts towards the end of the year and then I'll contact MNR for their advice on what
to do after. Don't want to waste their time at the moment as I haven't got any cash to do anything anyway. Good luck with your build too,
hope everything goes ok for you.
[Edited on 24/2/07 by Rick James]
|
|
Agriv8
|
posted on 24/2/07 at 08:47 PM |
|
|
Going to come online at some point but the MNR is customisable ( at chassis stage it makes it a bugger to price up the module packs )
And mark needs to stop his constant improval plan. ( no chance there then !!!)
Best bet is have a visit and Chris will talk money.
Regards
Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
Rick James
|
posted on 25/2/07 at 01:36 PM |
|
|
Hopefully should have a better idea of where I am towards the end of the year. The people at MNR seem like really approachable guys from what people
say on here.
People's build diaries are very interesting too, getting in to it a bit now. I'm not mechanically minded whatsoever so I'm going to
really have to do my homework before undertaking anything like this.
[Edited on 25/2/07 by Rick James]
|
|
G.Man
|
posted on 25/2/07 at 10:37 PM |
|
|
http://forums.overclockers.co.uk/showthread.php?p=8834490#post8834490
MNR getting lots of positive comments here
Opinions are like backsides..
Everyone has one, nobody wants to hear it and only other peoples stink!
|
|
JoaoCaldeira
|
posted on 28/2/07 at 07:26 PM |
|
|
Hi.
I made an XLS with all needed bits to build a car (it's BEC oriented, but very near any build, actually.
If you want it, just e-mail me.
Cheers,
Joao
|
|
clutch_kick
|
posted on 1/3/07 at 03:07 PM |
|
|
Joao, can you send me the XLS. i'm aimimg for an R1 Vortx too, i'll U2U my email.
|
|
Rick James
|
posted on 1/3/07 at 08:59 PM |
|
|
Hello Joao, I would like that please that would be really handy. I've sent u a U2U.
Thanks bud.
|
|
Rick James
|
posted on 1/3/07 at 09:02 PM |
|
|
Damn, it wont let me send a U2U for some reason.
|
|
JoaoCaldeira
|
posted on 16/3/07 at 08:02 PM |
|
|
For those that still need the XLS with the parts, please email me;
I'll send it ASAP.
Cheers
Joao
|
|
Gergely
|
posted on 19/3/07 at 03:45 PM |
|
|
Joao,
U2U sent with my email for the xls. Thanks a lot!!!
Gergely
|
|