bpgoa
|
posted on 14/5/07 at 11:01 PM |
|
|
Half nuts for steering arms /track rod ends
Has anyone got any, or know where i can get some...
I need four...
also can someone confirm that they are 14mmx 2 (pitch)
Thanks
A
On and On the River flows... We the Undertow
|
|
|
DaveFJ
|
posted on 15/5/07 at 07:54 AM |
|
|
I bought some at Stoneliegh from one of the stainless fastner type stalls... Maybe at newark?
Dave
"In Support of Help the Heroes" - Always
|
|
02GF74
|
posted on 15/5/07 at 01:53 PM |
|
|
someone on here had a bunch of them; if you ask me nicelyu, I;ll try to find out who.
Rally design should sell them but don't, kinda stupid as they sell racks and most likely when you replace the rack, the half nuts will be
knacked too.
If you really get stuck, I can get full nuts from my local fastener place.
|
|
Peteff
|
posted on 15/5/07 at 06:33 PM |
|
|
Ford still sell them, they use same for a few different models.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
bpgoa
|
posted on 21/5/07 at 09:18 PM |
|
|
Still looking if anyone has them...
Still trying to find out the thread size so that i can by the correct tap and die set to make extensions....
If anyone can help
On and On the River flows... We the Undertow
|
|
chriscook
|
posted on 21/5/07 at 10:40 PM |
|
|
I think I have some send me a u2u tomorrow to remind me and i'll have a look.
|
|
iiyama
|
posted on 22/5/07 at 05:35 PM |
|
|
Sierra TRE's that I have would appear to be M14 X 2. Hope thats what they are because thats the die Ive ordered!
If its broke, fix it. If it aint broke, take it apart and find out how it works!
|
|