TimC
|
posted on 25/8/07 at 10:12 AM |
|
|
Wooo- and-indeed- HOOOOOOOOO!
She's only a bl@@dy runner!
Was at local autoparts emporium at 9am this morning. Bought oil, a few other bits and then went to fill a jerry can with fuel.
Got home - filled with fluids. Attached fuel hose at tank end. Put exhaust headers on loosly - facing forwards out of garage.
Disconnected the fuel pump. Turned engine over for 30 seconds. Connected fuel pump. A while more turning-over; doubts creeping in. Then a cough.
Next a cough and a splutter. Then it would run while the starter was turning. Soon it's firing on four cylinders and I'm a very happy
boy.
Considering the extent that I butchered the bike-loom this is a major achievement for me. I'd like to thank everyone who's helped me get
this far - notably Fesycresy, Lenny (long time since posted but still around) CJTherman, Bistilly, Worx and of course the chaps @ MNR!
HAPPY DAYS!!!!!
|
|
|
ch1ll1
|
posted on 25/8/07 at 10:52 AM |
|
|
well done,
its a great feeling,
i know what you mean about the loom,
did the same when i did mine
paul
|
|
worX
|
posted on 25/8/07 at 10:54 AM |
|
|
Woo HOOOO
Really chuffed for you mate!!!
Steve
|
|
coozer
|
posted on 25/8/07 at 11:03 AM |
|
|
Well done Tim, hope it gives you the same push as I got when it started.
Where's the video??
Steve
1972 V8 Jago
1980 Z750
|
|
zxrlocost
|
posted on 25/8/07 at 06:43 PM |
|
|
good old carb engines ay tim
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
TimC
|
posted on 25/8/07 at 06:58 PM |
|
|
Bloomin' right mate. Not sure I'm ready to cut an '07 R1 loom off at the plug! I'm so chuffed - I am actually drinking
Champagne!
|
|
zxrlocost
|
posted on 25/8/07 at 11:31 PM |
|
|
Im cutting an 05 loom if you feel sorry for me
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|